Hsiuping University of Science and Technology Institutional Repository : Item 310993100/2246
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 4334/7631
造访人次 : 3189436      在线人数 : 19
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.hust.edu.tw/dspace/handle/310993100/2246

题名: 使用反應曲面法分析與建模線切割碳化物材料之表面粗糙度與電極損耗之研究
作者: 葉柏成
贡献者: 精密機械與製造科技研究所
关键词: 預測模式
表面粗糙度
電極線磨耗
放電加工
反應曲面法
日期: 2009-06
上传时间: 2011-05-23T05:30:34Z
摘要: 本文使用反應曲面法建立線切割放電加工碳化鎢材料，其過程中表面粗糙度及電極線磨耗的預測模式。採用碳化鎢P10材料為實驗試件，此材料廣泛使用於模具製作方面，並提出一階與二階預測模式將探討其最佳製程參數，包含脈衝時間、峰值電壓、峰值電流、電極線速等四個製程參數，研究表面粗糙度及電極線磨耗之影響。本實驗設計採用中心組合設計(CCD)規劃，在研究中所提出的預測模式經由變異數分析加以分析，结果顯示所提出二階預測模式經由實驗值，證實其獲得預測值非常接近實驗值，且在95%信心指數範圍內。
In this paper, the predictive model of surface roughness (SR) and wire-electrode wear (WW) in the Wire Electrical Discharge Machining (WEDM) process of cemented tungsten carbide using the response surface methodology had been carried out. The cemented tungsten carbide P10 grade, which is widely used in mould and tool applications, was adopted as the workpiece material to explore the performance characteristics of WEDM process. The first and second order models were developed to study the effect of four processing parameters, pulse duration, open discharge voltage, peak current and wire speed on the surface roughness (SR) and wire-electrode wear (WW). The experiment plan adopts the centered composite design (CCD). The predictive models proposed in this study were investigated by the analysis of variance (ANOVA). The second order model in this study have been proved to fit and predict values of the performance characteristics close to those readings recorded experimentally with a 95% confidence interval.
显示于类别:[機械工程系(含精密機械與製造科技碩士班)] 學位論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML464检视/开启

在HUSTIR中所有的数据项都受到原著作权保护.

 

DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈